Parsun F6ABMS 6HP Outboard Motor, Manual Start, 15” Short Shaft, 59Lbs / 27kg Net, 3 Years back to base Warranty.

Features

Tiller Handle & Pull Starter; Short Shaft, 1.3L (0.35 US Gallon)

integral fuel tank; Light weight only 60Lbs; 1 cylinder OHV engine with

148 cc displacement; Full throttle 4500-5500rpm, Max output 6HP;

Compression Ratio 8.9:1; Innovative CDI ignition system; Gear shift:

Forward-Neutral-Reverse; Trim & tilt 4 positions with shallow drive;

Vibration reduction system; Aluminum prop included.

Spiral

bevel gear more quietly, higher reduction ratios with longer life; High

strength clutch gives more reliable and better performance; Bigger

displacement 5% more power output; Use ball bearing and needle bearing

for driver shaft better performance; Wet-sump, forced bath lubrication

system protect the engine better;

CDI Ignition for easy start

in all conditions: idle speed will be down to 1200~1300rpm and fuel

consumption will be reduced, more quiet at idle speed by such new system

Easy operation with throttle, choke, recoil starter & stop switch;

Low fuel consumption max 2.3L per hour, Ultra low emission with EPA

approved;

Parsun outboard motors had been PDI (Pre Delivery

Inspection) before packed into the box and ship. Motor oil had been

drained out for shipping. This motor use regular 4 stroke motor oil SAE

10W-30. Please add motor oil & fill up with the gasoline before

start the motor. Please keep the motor manual & packing for

servicing the motor.

Three years limited warranty applies to

all new Parsun outboard motors

Please keep the motor packing for service.

SPECIAL

NOTICE TO BUYER: PARSUN MOTORS ARE ALL TESTED BEFORE BEING SHIPPED.

PLEASE READ THE MANUAL BEFORE USE. LEG OIL IS FILLED. PLEASE ADD MOTOR

OIL (10W-30 OR 5W-30) BEFORE TRYING TO START IT. HIGH GRADE

GASOLINE IS RECOMMENDED

Specifications

Engine type: 4-stroke,1-cylinders, OHV
Displacement: 148 cc
Bore x Stroke mm (inches): 64.0×46.0 (2.52×1.8)
Max output: 6HP / 4.4kw
Full throttle RPM range: 4500~5500
Ignition system: CDI
Starting system: Manual
Steering system: Tiller control
Gear shift: Forward-Neutral-Reverse
Gear ratio: 2.08 (27/13)
Trim and tilt system: 4 positions/Shallow drive
Max fuel consumption: 2.3 L/h
Fuel tank capacity: 1.3 L
Gear oil capacity: 100cc
Dry weight: 60Lbs / 27kg
Overall width: 15.4inches / 390mm
Recommended transom height: 15-16 inches
Propeller: Aluminum - 3-7.8"x9"
Alternator output: 12V DC* (optional)
Recommended Oil: 10W-30 or 20W-40