Parsun 6HP Outboards

Parsun F6ABMS 6HP Outboard Motor, Manual Start,15" Short Shaft, 59Lbs / 27kg Net, 2 Years back to base Warranty

Parsun F6ABML 6HP Outboard Motor, Manual Start, 20" Short Shaft, 61Lbs Net / 28kg , 2 Years back to base Warranty

Features

Tiller Handle & Pull Starter; 1.3L (0.35 US Gallon) integral fuel tank; Light weight only 60Lbs; 1 cylinder OHV engine with 148 cc displacement; Full throttle 4500-5500rpm, Max output 6HP; Compression Ratio 8.9:1; Innovative CDI ignition system; Gear hift: Forward-Neutral-Reverse; Trim & tilt 4 positions with shallow drive; Vibration reduction system; Aluminum prop included. 

Spiral bevel gear more quietly, higher reduction ratios with longer life; High strength clutch gives more reliable and better performance; Bigger displacement 5% more power output; Use ball bearing and needle bearing for driver shaft better performance; Wet-sump, forced bath lubrication system protect the engine better; CDI Ignition for easy start in all conditions: idle speed will be down to 1200~1300rpm and fuel consumption will be reduced, more quiet at idle speed by such new system.

Easy operation with throttle, choke, recoil starter & stop switch; Low fuel consumption max 2.3L per hour, Ultra low emission with EPA approved 

Parsun outboard motors had been PDI (Pre Delivery Inspection) before packed into the box and ship. Motor oil had been drained out for shipping. This motor use regular 4 stroke motor oil SAE 10W-30. Please add motor oil & fill up with the gasoline before start the motor. Please keep the motor manual & packing for servicing the motor. 

Three years limited warranty applies to all new Parsun outboard motors Please keep the motor packing for service.

SPECIAL NOTICE TO BUYER: PARSUN MOTORS ARE ALL TESTED BEFORE BEING SHIPPED. PLEASE READ THE MANUAL BEFORE USE. LEG OIL IS FILLED. PLEASE ADD MOTOR OIL (10W-30 OR 5W-30) BEFORE TRYING TO START IT. HIGH GRADE GASOLINE IS RECOMMENDED